Description
Details
EA Degreaser is an industrial-strength cleaner/degreaser that is highly effective at the removal and cleaning of grease and grime on heavy machinery, stone, masonry, metal surfaces, fiberglass, plastics, etc.
Product Details
| Product Use | Concrete, Brick , Stone, Stucco, Exterior Wood, EIFS, Pavers, Painted Surface, Metal, Fabric, Carpet |
| Recommended Surfaces | Vertical, Horizontal |
| Special Note | Used for the removal of stains, algae, mold, mildew, etc. |
| Base Material | Hydrogen Peroxide |
| Application Method | Sprayer |
| pH | 3.7 to 4.3 |
| VOC Level | < 0 g/l |
| Flammable | No |
| Available Packaging | 1 Gallon, 5 Gallon, 30 Gallon, 50 Gallon, 275 Gallon |
| How To Apply | Spray on and allow to dwell for at least 15 minutes. Scrubbing might be required for heavy soiling. |
| Flash Point | None |
| Specific Gravity | 1.04 |
| Vapor Density | 1.0 |
| Biodegradable | Yes |
| Location | Interior, Exterior |
| Rinsing | Very Good |
| Appearance | Clear Liquid |
| Foaming | Low |
| Odor | Mild |
| Stability | Good |
Directions
Application
For most applications the product is initially applied without diluting. This includes carpet and upholstery spotting, shower cleaning, deck and patio cleaning, degreasing natural stone and freshening areas with mold and mildew. Do not mix with any other chemicals or products. Product should be applied by low pressure spray or with a sponge. Allow sufficient dwell time to penetrate the soil, light scrubbing is helpful if cleaning carpet, then wipe off. Rinse with clean water. When using for routine maintenance cleaning or porous substrates like grout or unfinished wood, rinsing is usually not required.
Dilution
Used undiluted for removal of mold and/or stubborn stains. Can be diluted at 1 to 5 parts water to 1 part cleaner for daily cleaning of bathroom and kitchen hard surfaces or diluted 5 to 10 parts water to 1 part cleaner for use as a spray/wipe on non-porous surfaces — test application recommended for naturally dyed fabrics.
Coverage
Dependent upon substrate and other conditions