EA Multi-Surface Water Repellent – Concentrate – Makes 5 Gallons
$128.99
EA Multi-Surface Water Repellent is a concentrate that mixes easily with clean water to make 5 gallons of ready-to-use product. This spray-on solution makes application quick and hassle-free while delivering long-lasting protection on a wide range of exterior surfaces, including concrete, masonry, and wood. What sets it apart is its breathable, vapor-permeable formula that allows treated surfaces to release trapped moisture, helping prevent damage and extending the life of the substrate. This solvent-free, penetrating sealer provides durable water repellency on most porous and semi-porous materials without altering their natural appearance, and it’s safe for people, pets, and plants. Plus, overspray will not etch glass or damage vehicle finishes, making it an ideal, worry-free choice for protecting your exterior surfaces. FREE GROUND SHIPPING IN THE CONTINENTAL U.S.
EA Multi-Surface Water Repellent is a concentrate that mixes easily with clean water to make 5 gallons of ready-to-use product. This spray-on solution makes application fast and hassle-free. Designed for versatility, it delivers long-lasting protection on a wide range of exterior surfaces, including concrete, masonry, and wood.
What sets EA Multi-Surface apart is its breathable, vapor-permeable formula. This allows treated surfaces to release trapped moisture, helping prevent damage caused by water buildup and extending the life of the substrate.
Formulated as a solvent-free, penetrating sealer, it provides durable water repellency on most porous and semi-porous materials without altering the natural appearance. The formula is safe for people, pets, and plants, and overspray will not etch glass or damage vehicle finishes—making it ideal for worry-free application in any environment.
Protect your surfaces with confidence and ease using EA Multi-Surface.
- Water-based, non-toxic, non-flammable formula does not harm landscape plantings
- Safe and easy spray-on application with soap and water cleanup
- Ideal for use on concrete, brick, stucco, stone (natural and synthetic), EIFS, pavers, wood decks, wood fencing, wood boat docks, and more
- Vapor permeable (breathable) water repellent prevents moisture being trapped behind the surface
- Protects against water damage, mold, mildew and makes surface easier to keep clean
- Safe to walk on in as little as 1-hour, cures in 24-hours
- Dries completely clear with no change to the surface appearance
- Contains zero VOCs
Additional information
| Weight | 64 oz |
|---|---|
| Dimensions | 3.5 × 5 × 9 in |
Details
Product Details
| Product Use | Concrete, Brick , Stone, Stucco, EIFS, Pavers, Exterior Wood | |
| Coverage | Approximately 1200 sq ft | |
| Finish / Sheen | Natural / Clear | |
| Dry Time | 1 to 2 hours | |
| Algae, Mold, Mildew Resistant | Yes | |
| Number of Recommended Coats | 2 | |
| Recommended Surfaces | Vertical, Horizontal | |
| Base Material | Water-Based | |
| Application Temp | 45F to 95F | |
| Application Method | Airless Sprayer, Pump Sprayer | |
| Clean Up | Soap & Water | |
| VOC Level | 0 g/l | |
| Flammable | No | |
| Warranty | Limited 2-Year | |
| Available Packaging |
|
Material …Approx Coverage per diluted Gallon
Concrete Smooth ……………… 300 – 400
Concrete Block Lt.Wt. ………… 75 – 150
Sand Block Cast Stone ………. 200 – 300
Brick Porous ……………………… 150 – 200
Stucco Smooth Finish ……….. 150 – 200
Concrete Textured ……………. 200 – 300
Concrete Block Dense ………. 150 – 200
Sandstone ………………………… 150 – 200
Brick Dense ………………………. 300 – 350
Stucco Rough Finish …………. 100 – 150
Rough Sawn Wood …………… 150 – 250
Smooth Sawn Wood …………. 300 – 400
Wood Shingles ……………….… 100 – 200
Plywood ………………………….… 300 – 360
FAQ
Does this product dry matte or gloss?
This is a penetrating sealer / water repellent and does not contain a resin so it will soak into the substrate and completely disappear when fully dried.
Is this product available with color enhancer?
No it is not. This product is designed to soak into the surface without making any visible change to the color or sheen.
What is the dry time for this product?
The surface should be “dry” in about an hour or two depending on ambient humidity and temperature. It is okay to walk on it as soon as the surface appears dry but we recommend at least 24 hours cure time before you allow it to get wet.
Is this product suitable for sealing a concrete bird bath?
While the product is safe enough you really need to use something that will form a film over the surface. This product is not designed for constant hydrostatic pressure so it would work but would not hold up very long before it would need to be reapplied.
How often should this product be reapplied?
You shouldn’t have to apply it any more often than every three to five years. In some instances yet will last longer in rare cases it needs to be applied after only two years. Each subsequent application just reinforces what has already penetrated into the surface.
What is the best way to apply this product?
The easiest and most effective way to apply is using a garden pump sprayer. You can use a brush or roller but the viscosity of this product is very similar to water so it is very difficult to get enough to stay on to allow for adequate saturation.
Can this product be used to seal painted outdoor concrete statues?
This product would work great on concrete statues but, if they have been painted, it will not be able to penetrate into the surface so it is not recommended.
Does this product work to keep mold, mildew, and dirt from building up on flagstone and mortar?
It wont prevent mold, mildew and dirt from accumulating on the surface but it will aid in keeping those contaminants from attaching or penetrating into the surface. This makes it much easier to keep the surface clean without having to use a pressure washer or chemical cleaners.
Directions
Preparing Surface
Before applying EA Multi-Surface all surfaces should be clean and free from dust, dirt, oils, grease, curing compounds, coatings, mildew, mold, algae, other water repellents or any other contaminants. If efflorescence (white residue) is present, wash surface with cleaner and/or pressurized water. Rinse any cleaning product thoroughly from the substrate. Surfaces may be cleaned by any agreeable method such as: Power wash, sweep, deck cleaners, stain removers / strippers.
How to Apply
- Mix EA Multi-Surface Concentrate into five gallon container or sprayer with clean water.
- Apply EA Multi-Surface using low pressure spray equipment. To avoid atomizing product, use a spray tip size of .035 to .051.
- Apply uniformly and avoid over application. Heavy runs and drips should be either brushed into the surface or removed with a rag or mop. On extremely porous substrates, two applications will provide superior application.
- For interior applications it might be necessary to scrub floors after the product dries to remove any excess material from the surface that might cause slickness.
- If needed, apply a second coat immediately after the first coat has penetrated. Control application so that the second coat is applied within a few minutes after the first coat appears dry.
Cleanup
Thoroughly wash all equipment and clothing after use. Application equipment may be cleaned with soap and water. Also, clean any unwanted overspray immediately with water. A cleaner may be needed but water should be enough to wash product off of glass, metal, etc.
Attachments
Product Flyer
Safety Data Sheet